ND16 Series LED Indicator Signal Light 22mm 25mm Indicator Lamp Pilot Light
Product Description:
The ND16 series signal lights are designed for telecommunication and electrical circuits operating at an alternating current (AC) frequency of 50 Hz (or 60 Hz), with a rated voltage not exceeding 400 V, or in direct current (DC) circuits with a working voltage not exceeding 400 V. It serves the purpose of indicating signals, warning signals, accident signals, and other forms of signal indication.
Meet the standard: GB/T 14048.5.
Product Feature:
●Light Source: The ND16 series signal lights use LED lights as the light source, which have a long lifespan and low energy consumption.
●Safety and Reliability: The signal lights feature concealed terminal connections, ensuring safety and reliability.
●Universal Installation: The signal lights have a special locking nut structure that allows them to be universally installed in panel holes with diameters of Φ22.5 mm and Φ25.5 mm.
Product Specification:
| Rated working voltage Ue(V) |
AC/DC 6 |
AC/DC 12 |
AC/DC 24 |
AC/DC 36 |
AC/DC 48 |
AC/DC 110 |
AC/DC 220 |
AC/DC 380 |
AC 100 |
AC 220 |
AC 380 |
| Rated working current le(mA) |
≤20 |
| Rated impulse withstand voltage Uimp(kV) |
4 |
| Rated insulation voltage Ui(V) |
400 |
| Allowed voltage fluctuation range |
±10% |
| Base color |
green, yellow, red, blue, white, orange |
| Working life(h) |
≥30000 |
| Brightness(cd/m) |
≥40 |
| Buzzer technical parameters |
|
| Rated working voltage Ue(V) |
AC/DC 24 |
AC/DC 36 |
AC/DC 48 |
AC/DC 110 |
AC 110 |
AC 220 |
AC 380 |
| Rated working current le(mA) |
≤20 |
| Loudness(dB/10cm) |
70~105 |
| Brightness(cd/m) |
≥20 |
Installation Steps:
1. Check Voltage Compatibility:
●Before installing and using the signal light, check that the rated working voltage matches the application requirements.
2. Prepare for Installation:
●Remove the plastic locking nut from the signal light.
●Insert the signal light through the front of the panel.
●From the back of the panel, tighten the plastic locking nut to secure the signal light in place.
●Connect the power supply wires to the signal light.
Operating Conditions and Environmental Suitability:
●Ambient temperature is -5℃~+40°C, the average temperature during 24 hours couldn't exceed +35°C.
●Altitude: ≤2000m.
●Atmosphere condition: Relative humidity of the atmosphere couldn't exceed 50% when the highest temperature is +40°C; much higher relative humidity is allowable under the condition of lower temperature, for example, when the temperature reaches +20°C, the relative humidity is up to 90%, taking into account the condensation that may occur on the product surfaces due to temperature changes.
●Pollution grade: 3.
●Installation category: II.
●The ND16 series signal lights should be installed in an environment without significant shaking, impact, vibration, and without exposure to rain or snow.
●It should be installed in an environment without the risk of explosion and where the medium does not contain gases that could corrode metals or destroy insulation, nor excessive dust.
●For products with a neck size of 22: Φ22.3 0+0.4 mm is compatible with Φ25.5 0+0.5 mm. For products with a neck size of 16: Φ16.2 0+0.2 mm.
Product Tags:
|
|
ND16 Series LED Indicator Signal Light 22mm 25mm Indicator Lamp Pilot Light Images
|
